Skip to main content
SolarQna
All Engineering ArticlesCell Physics & Yield · 2,693 words · 12 min read
Cell Physics & Yield

What Is a Good Solar Panel Efficiency? Benchmarks Across 607 Verified Datasheets

A quantitative engineering study of module efficiency distributions, cell-technology quartiles, and the real cost-per-kWh consequences of chasing 25% nameplate ratings

Key Engineering Takeaways
  • The SolarQna median module efficiency across 607 verified panels is 21.49%, with a median power density of 216.8 Wp/m² — meaning anything above 22.5% is genuinely above-market.
  • Only 6.6% of catalogued modules exceed 24.0% efficiency, and 27.7% sit below 21.0%; the market is concentrated in the 21.0–22.99% band (53.5% of all panels).
  • Efficiency is area-normalised power: η = Pmax / (A × 1000 W/m²). A 670 Wp panel at 24.8% occupies 2.70 m², while a 615 Wp panel at 24.8% occupies 2.48 m² — same efficiency, different roof footprint.
  • Cell technology is the dominant efficiency predictor: Mono PERC clusters near 21.2%, N-Type TOPCon near 22.6%, and HJT/Back Contact/ABC architectures reach 23.5–25.1%.
  • For constrained urban rooftops in India, the UK, and the US, efficiency-per-square-metre — not nameplate Wp — is the binding economic variable, and it must be evaluated jointly with degradation rate and warranty length.

Engineering Reality vs. Installer Claims

Ask ten installers what constitutes a "good" solar panel efficiency and you will receive ten different answers, most of them anchored to whatever SKU happens to be sitting in their warehouse. The claim "22% is high efficiency" was defensible in 2019. In 2025, with 607 verified module datasheets catalogued in the SolarQna database, 22% is barely above the median. The market has moved, and the vocabulary used to describe it has not.

The core problem is that efficiency is a derived quantity, not a primary specification. Manufacturers publish nameplate power (Pmax in Wp) and module dimensions; efficiency is computed from those two numbers plus the Standard Test Condition irradiance of 1,000 W/m². This means efficiency can be inflated by shrinking the frame, by measuring aperture area rather than gross area, or by rounding Pmax upward within the ±3% flash-test tolerance permitted under IEC 61215. A panel advertised at 22.4% may in reality be a 21.9% panel with a favourable binning label.

The second reality check concerns the relationship between power and efficiency. Installers frequently conflate the two. A 700 Wp module sounds categorically superior to a 615 Wp module — until you measure the roof. The 700 Wp panel is typically a 2384 × 1303 mm format occupying 3.11 m², yielding roughly 22.5% efficiency. The 615 Wp panel may be a 1872 × 1325 mm format occupying 2.48 m², yielding 24.8%. On a constrained urban terrace, the smaller, higher-efficiency module delivers more kilowatt-hours per square metre of usable roof, which is the only metric that matters when area is the binding constraint.

The third reality check is economic. Efficiency improvements above roughly 23% are purchased with back-contact architectures, heterojunction (HJT) stacks, or advanced tunnel-oxide passivating contacts — all of which carry a bill-of-materials premium. Whether that premium is recovered depends entirely on the opportunity cost of roof area, the local irradiance, and the tariff regime. In a market with net metering and abundant roof area, paying 30% more per watt for 2% more efficiency is value-destructive. In a market with a 40 m² roof cap and a 10 kW system target, it is the only rational choice.

This study establishes defensible benchmarks. It defines efficiency rigorously, derives the distribution quartiles from the verified dataset, and then tests those benchmarks against three real deployment scenarios: an Indian urban terrace under PM Surya Ghar, a UK/EU terraced roof under MCS and CEI 0-21 constraints, and a US suburban roof under NEC 2023 and the ITC.

Core Physics & Quantitative Equations

Module efficiency is defined as the ratio of maximum DC power output to the incident solar power intercepted by the module's aperture area under Standard Test Conditions (irradiance 1,000 W/m², cell temperature 25 °C, AM1.5G spectrum):

η_module = Pmax / (A_aperture × G_STC) × 100%

where:
  η_module   = module conversion efficiency (%)
  Pmax       = nameplate maximum power at STC (Wp)
  A_aperture = module aperture area (m²)
  G_STC      = 1,000 W/m²

Rearranging for area gives the design equation that governs every constrained-roof sizing exercise:

A_required = P_target / (η_module × 1,000 W/m²)

Example: 10,000 Wp target at 21.5% efficiency
A = 10,000 / (0.215 × 1,000) = 46.5 m²

Same target at 24.8% efficiency
A = 10,000 / (0.248 × 1,000) = 40.3 m²

Area saved = 6.2 m² (13.3% reduction)

Power density (Wp/m²) is the reciprocal formulation and is more directly useful for roof planning because it eliminates the intermediate efficiency step:

Power density = Pmax / A_aperture = η_module × 1,000

AIKO-A805-GRH78Dw:  805 Wp / 3.212 m² = 250.6 Wp/m²  → 25.1%
Maxeon SPR-BE66-GD615: 615 Wp / 2.483 m² = 247.6 Wp/m² → 24.8%
Trina TSM-NEG19RC.20Q: 670 Wp / 2.702 m² = 248.0 Wp/m² → 24.8%

Temperature behaviour modifies real-world output. The temperature coefficient of Pmax (γ_Pmax) is typically −0.26%/°C for TOPCon and back-contact architectures and −0.34%/°C for older PERC. The cell temperature under operating conditions is estimated via the NOCT model:

T_cell = T_ambient + (NOCT − 20) × (G_poa / 800)

At G_poa = 800 W/m², T_ambient = 35 °C, NOCT = 44 °C:
T_cell = 35 + (44 − 20) × 1.0 = 59 °C

Power loss = γ_Pmax × (T_cell − 25)
           = −0.26% × (59 − 25) = −8.84%   (TOPCon)
           = −0.34% × (59 − 25) = −11.56%  (PERC)

The 2.72 percentage-point delta between a −0.26%/°C and a −0.34%/°C module at 59 °C cell temperature is worth more annual yield in hot climates than a 1% efficiency advantage. This is the single most under-appreciated trade-off in Indian and Middle Eastern procurement.

Finally, lifetime energy yield integrates degradation:

E_lifetime = P_stc × Σ(1 − d)^t × PR × H_annual

where d = annual degradation rate, PR = performance ratio (~0.80),
H_annual = specific yield (kWh/kWp/yr)

A module degrading at 0.25%/yr versus 0.55%/yr over 25 years retains 93.9% versus 87.1% of initial output — a 6.8 percentage-point spread that compounds into thousands of kilowatt-hours.

Empirical Data From Verified SolarQna Datasheets

The SolarQna dataset of 607 verified modules yields a median efficiency of 21.49%, a median nameplate power of 490 Wp, and a median power density of 216.8 Wp/m². The distribution is heavily right-skewed:

Efficiency BandModule CountShare of DatasetEngineering Interpretation
≥ 24.0% (Ultra)406.6%Back-contact, HJT, ABC — premium tier
23.0% – 23.99%7412.2%High-grade TOPCon, HJT
22.0% – 22.99%13522.2%Mainstream N-Type TOPCon
21.0% – 21.99%19031.3%Late-generation PERC / entry TOPCon
< 21.0%16827.7%Legacy PERC, poly, small-format modules

By cell technology, the dataset splits as Mono PERC (36.2%), N-Type TOPCon (34.4%), Unspecified (15.3%), HJT (9.1%), Back Contact (4.4%), with thin-film, HPBC, and shingled mono each at 0.2%. The efficiency clustering is stark: PERC modules concentrate in the 20.5–21.5% band, TOPCon in the 22.0–23.0% band, and HJT/back-contact in the 23.5–25.1% band.

The following table compares eight verified modules spanning the efficiency spectrum:

ModuleCell TypePmax (Wp)η (%)Power Density (Wp/m²)γ_Pmax (%/°C)Degradation (%/yr)Warranty (Product/Perf)
AIKO-A805-GRH78DwBack Contact80525.1250.6−0.26n/a15 / 30 yr
Maxeon SPR-BE66-GD615Back Contact61524.8247.6−0.260.2540 / 40 yr
Trina TSM-NEG19RC.20QN-Type TOPCon67024.8248.0−0.260.3512 / 30 yr
JA Solar JAM66D50-670/GBMonocrystalline67024.8248.0−0.260.3512 / 30 yr
JinkoSolar JKM645-670N-66QL6-BDXN-Type TOPCon67024.8248.0−0.260.3512 / 30 yr
Sunpro SPDG665-BC132R12Back Contact66524.62246.2−0.260.3525 / 30 yr
LONGi LR7-72HVDF-665MMonocrystalline66524.6246.2−0.260.3515 / 30 yr
Vikram ENERSURGE VSMDH.66.660.05Back Contact66024.43244.3−0.260.3512 / 30 yr

Three observations follow. First, the top of the efficiency table is dominated by back-contact architectures — AIKO's 25.1% and Maxeon's 24.8% both use interdigitated back-contact cells that eliminate front-side metallisation shading. Second, the 670 Wp TOPCon modules from Trina, JA Solar, and JinkoSolar all land at exactly 24.8% because they share the 2384 × 1303 mm format; their nameplate power is identical because their efficiency is identical. Third, the degradation distribution is bimodal: 46.3% of modules sit in the 0.31–0.40%/yr band, 33.5% in the 0.41–0.55% PERC band, and only 14.9% achieve ≤0.30%/yr — a tier occupied almost exclusively by premium back-contact and HJT products.

System Sizing, Inverter Matching & Field Pitfalls

Consider a concrete sizing scenario. A homeowner in Pune, India, has a usable south-facing terrace area of 42 m² after accounting for walkways and parapet shading. The target is maximum annual generation under PM Surya Ghar, with a single-phase 230 V grid connection limiting inverter capacity to 7.5 kW.

At the dataset median power density of 216.8 Wp/m², the roof supports 42 × 216.8 = 9,106 Wp — exceeding the inverter limit. At the 24.8% tier (248 Wp/m²), the roof supports 42 × 248 = 10,416 Wp. The binding constraint is therefore the inverter, not the roof, and the correct design is a DC/AC ratio of approximately 1.21 (9,100 Wp DC into a 7,500 W inverter). Efficiency is not the limiting variable here.

Now change the scenario. A terraced house in Bristol, UK, has 18 m² of usable roof. At 216.8 Wp/m², the roof supports 3,902 Wp. At 248 Wp/m², it supports 4,464 Wp — a 14.4% uplift in installed capacity from the same roof. Under the UK Smart Export Guarantee, that uplift is directly monetisable. Here, efficiency is the binding variable.

The inverter matching rules that govern both scenarios are:

  • DC/AC ratio: 1.10–1.30 for high-irradiance sites, 1.15–1.35 for temperate sites. Exceeding 1.35 causes clipping losses above 2% of annual yield.
  • MPPT voltage window: The string voltage at record-low cell temperature (−10 °C) must not exceed the inverter's maximum DC input. Using Voc = 50.95 V for the Trina TSM-NEG19RC.20Q and a temperature coefficient of Voc of −0.25%/°C, a 12-module string reaches 12 × 50.95 × (1 + 0.0025 × 35) = 665 V at −10 °C — safely under a 1,000 V or 1,100 V limit but marginal for a 600 V inverter.
  • Current matching: Bifacial modules with rear-side gain of 5–15% require inverters rated for the combined current. The AIKO-A805-GRH78Dw's Isc of 17.13 A exceeds the 15 A per-MPPT limit of many residential inverters, forcing either a single-string-per-MPPT layout or a commercial-grade inverter.

Field pitfalls that erode nameplate efficiency include:

  1. Soiling losses of 3–7% in Indian urban environments, reducible to 1–2% with fortnightly cleaning.
  2. Mismatch losses of 1–2% in strings where modules are not from the same flash-test bin.
  3. Shading losses that are non-linear: a single cell shaded to 50% can reduce string output by 30% in a series-connected topology without optimisers.
  4. Thermal derating as computed in Section 2 — a 2.72 percentage-point swing between −0.26%/°C and −0.34%/°C modules at 59 °C.

Lifetime Economics & Cost-per-kWh Trade-Offs

The correct economic comparison between efficiency tiers is levelised cost of energy (LCOE), not cost per watt. The formula:

LCOE = (CAPEX + Σ O&M_t / (1+r)^t) / Σ E_t / (1+r)^t

where E_t = P_stc × (1 − d)^t × PR × H_annual

Assume a 5 kW system in a location with H_annual = 1,600 kWh/kWp, PR = 0.80, discount rate 6%, and 25-year horizon. The sensitivity table below varies efficiency tier, degradation rate, and installed cost:

Efficiency TierPower Density (Wp/m²)Roof Area for 5 kWInstalled Cost (USD/W)Degradation (%/yr)25-yr Energy (MWh)LCOE (USD/kWh)
20.5% (legacy PERC)20524.4 m²0.720.55148.20.058
21.5% (median)21523.3 m²0.780.45152.60.061
22.6% (TOPCon)22622.1 m²0.850.35157.10.065
24.0% (high TOPCon)24020.8 m²0.980.30159.40.074
24.8% (back-contact)24820.2 m²1.180.25161.20.088
25.1% (ABC premium)25119.9 m²1.350.25161.50.100

The table exposes the central economic truth: LCOE rises monotonically with efficiency tier when roof area is unconstrained. The 25.1% module costs 72% more per watt than the 20.5% module and produces only 9% more lifetime energy. The efficiency premium is only justified when the alternative is not installing capacity at all.

The break-even condition is area-constrained:

Justified premium = (E_high − E_low) × tariff × lifetime
                  / (CAPEX_high − CAPEX_low)

If roof area is capped at 20 m²:
  Low tier: 20 × 205 = 4,100 Wp
  High tier: 20 × 251 = 5,020 Wp
  Capacity uplift = 22.4%

In this constrained case, the 25.1% module delivers 22.4% more capacity from the same roof, and the LCOE comparison inverts — the premium tier becomes the lower-LCOE option. This is precisely the situation on Indian urban terraces, UK terraced housing, and dense US suburban lots.

Warranty length compounds the effect. The Maxeon SPR-BE66-GD615 carries a 40-year product and performance warranty at 0.25%/yr degradation — the longest in the dataset. Over 40 years, its cumulative energy advantage over a 0.55%/yr module exceeds 12%, which materially shifts the LCOE calculus in its favour despite the higher upfront cost.

Global Standards & Regional Compliance (India, USA, Europe)

India. The Ministry of New and Renewable Energy (MNRE) maintains the Approved List of Models and Manufacturers (ALMM), and PM Surya Ghar residential subsidies require ALMM-listed modules. Domestic Content Requirement (DCR) rules further mandate locally manufactured cells and modules for certain subsidy categories. Among the modules in our comparison table, the Trina TSM-NEG19RC.20Q, JA Solar JAM66D50-670/GB, JinkoSolar JKM645-670N-66QL6-BDX, LONGi LR7-72HVDF-665M, and Vikram ENERSURGE VSMDH.66.660.05 carry ALMM approval. The AIKO, Maxeon, and Sunpro modules do not, which disqualifies them from subsidised Indian residential installations regardless of their superior efficiency. This is a compliance constraint that overrides every engineering argument.

United States. NEC 2023 Article 690 governs PV system installation, with Article 690.7 requiring string voltage calculations at record-low temperatures and Article 690.12 mandating rapid shutdown within 1 foot of the array boundary. Modules must be listed to UL 61730 for safety and UL 61215 for design qualification. The federal Investment Tax Credit (ITC) under the Inflation Reduction Act provides a 30% base credit, with domestic content bonuses available for projects meeting specific manufacturing thresholds. Efficiency does not affect ITC eligibility, but higher-efficiency modules reduce balance-of-system costs (fewer rails, fewer optimisers, less labour), which improves the credit's effective value per installed watt.

Europe. IEC 61215 (design qualification) and IEC 61730 (safety) are the baseline certifications. Grid connection is governed by national codes: VDE-AR-N 4105 in Germany, CEI 0-21 in Italy, G98/G99 in the UK, and EN 50549-1 across the EU. These codes impose inverter behaviour requirements — reactive power capability, frequency ride-through, and anti-islanding — that are independent of module efficiency but constrain inverter selection. VAT treatment varies: most EU member states apply reduced VAT rates (5–10%) to residential solar, while the UK applies 0% VAT to qualifying installations until 2027. Efficiency tier does not change VAT treatment, but it does change the total invoice and therefore the absolute VAT saving.

The cross-jurisdictional conclusion is that efficiency is a secondary variable. Compliance, subsidy eligibility, and inverter compatibility dominate procurement decisions in every major market.

Methodology, Dataset Coverage & Limitations

The benchmarks in this study derive from the SolarQna verified module database, comprising 607 panels from 359 manufacturers across 22 tracked markets. Each record includes nameplate power, aperture dimensions, cell technology, temperature coefficient, degradation rate, warranty terms, and — where applicable — ALMM approval status. Efficiency is computed as Pmax / (A × 1,000 W/m²) using manufacturer-declared aperture area.

Three limitations must be acknowledged. First, aperture area is self-reported. Manufacturers occasionally measure efficiency against aperture area rather than gross module area, inflating the figure by 1–3% for framed modules with wide borders. Where gross dimensions were available, we recomputed; where they were not, we relied on declared values.

Second, the dataset is not a random sample of global production. It over-represents modules available in the 22 tracked markets and under-represents thin-film and utility-scale-only formats. The single thin-film record (0.2% of the dataset) is statistically insufficient to characterise that technology class.

Third, degradation rates are warranty-stated, not field-measured. Warranty degradation curves are typically linearised approximations of a non-linear physical process, and field degradation in hot, humid, or high-UV environments frequently exceeds the warranted rate. The 0.25%/yr figure for the Maxeon module reflects a contractual commitment, not an independently verified field measurement.

Despite these limitations, the distributional findings are robust: the median efficiency of 21.49%, the concentration of 53.5% of modules in the 21.0–22.99% band, and the clear technology-driven clustering of PERC, TOPCon, and back-contact architectures are consistent across sub-samples and align with independent market surveys. The practical benchmark for 2025 procurement is therefore straightforward: below 21% is legacy, 21–22.5% is mainstream, 22.5–24% is high-performance, and above 24% is premium — and the premium is only economically rational when roof area, not budget, is the binding constraint.

Live Verified Hardware Cited in This Study

Check full datasheet metrics & PDF sources

Browse full panel database →
AIKO · Back Contact
AIKO-A805-GRH78Dw
Power805Wp
Efficiency25.10%
γPmax-0.260%/°C
Maxeon · Back Contact
Maxeon SPR-BE66-GD615
Power615Wp
Efficiency24.80%
γPmax-0.260%/°C
Trina Solar · N-Type TOPCon
Trina Solar TSM-NEG19RC.20Q
Power670Wp
Efficiency24.80%
γPmax-0.260%/°C
JA Solar · Monocrystalline
JA Solar JAM66D50-670/GB
Power670Wp
Efficiency24.80%
γPmax-0.260%/°C
Power670Wp
Efficiency24.80%
γPmax-0.260%/°C
Sunpro Power · Back Contact
Sunpro Power SPDG665-BC132R12
Power665Wp
Efficiency24.62%
γPmax-0.260%/°C
LONGi Solar · Monocrystalline
LONGi Solar LR7-72HVDF-665M
Power665Wp
Efficiency24.60%
γPmax-0.260%/°C
Vikram Solar · Back Contact
Vikram Solar ENERSURGE VSMDH.66.660.05
Power660Wp
Efficiency24.43%
γPmax-0.260%/°C
Engineering FAQ

What efficiency percentage counts as a 'good' solar panel in 2025?

Based on the SolarQna dataset of 607 verified modules, the median efficiency is 21.49%. A defensible benchmark is: below 21% is legacy stock, 21–22.5% is mainstream, 22.5–24% is high-performance, and above 24% is premium. Only 6.6% of catalogued modules exceed 24.0%, so a 23% module is genuinely above-market, not merely adequate.

Why is a 670 Wp panel sometimes less efficient than a 615 Wp panel?

Efficiency is power divided by area, not absolute power. A 670 Wp module in the 2384 × 1303 mm format occupies 3.11 m² and yields roughly 24.8% efficiency, while a 615 Wp back-contact module in a 1872 × 1325 mm format occupies 2.48 m² and also yields 24.8%. If the 670 Wp panel were physically larger than 3.11 m², its efficiency would be lower despite the higher nameplate wattage. Always compare Wp/m², not Wp alone.

Does higher efficiency always mean better return on investment?

No. When roof area is unconstrained, LCOE rises monotonically with efficiency tier because the premium per watt outpaces the energy gain. Our sensitivity table shows LCOE climbing from 0.058 USD/kWh at 20.5% efficiency to 0.100 USD/kWh at 25.1%. The premium tier only wins when roof area is the binding constraint — for example, a 20 m² cap where a 25.1% module delivers 22.4% more installed capacity than a 20.5% module.

How does temperature coefficient interact with efficiency in hot climates?

A module with a −0.26%/°C temperature coefficient loses 8.84% of its rated power at 59 °C cell temperature, while a −0.34%/°C module loses 11.56%. That 2.72 percentage-point gap in Indian or Middle Eastern conditions frequently outweighs a 1% nameplate efficiency advantage. In hot climates, always prioritise a low-magnitude γ_Pmax over a marginal efficiency gain.

Do ultra-high-efficiency modules qualify for Indian government subsidies?

Not automatically. PM Surya Ghar subsidies require ALMM-listed modules, and DCR rules may further require domestically manufactured cells. In our comparison, the AIKO 25.1%, Maxeon 24.8%, and Sunpro 24.62% modules are not ALMM-approved and are therefore ineligible for subsidised Indian residential installations, despite outperforming ALMM-listed alternatives on efficiency. Compliance eligibility always overrides efficiency in procurement decisions.

What degradation rate should I look for alongside efficiency?

The dataset shows 46.3% of modules degrade at 0.31–0.40%/yr, 33.5% at 0.41–0.55%/yr, and only 14.9% at or below 0.30%/yr. Over 25 years, a 0.25%/yr module retains 93.9% of initial output versus 87.1% for a 0.55%/yr module — a 6.8 percentage-point spread. A slightly lower-efficiency module with a 0.25%/yr degradation rate can outperform a higher-efficiency module with 0.55%/yr over a full system lifetime.

Related Engineering Studies